New Bits

Beta85X Whoop Quad for Naked Hero6 Camera - TBS


Beta85X is packed with BEC board, case and adjustable mount for the naked camera, so you can easily build a cinewhoop with the naked camera and greatly minimize the weight. It flies GREAT on a 450mah 4s battery. You can get a quick and stable flight for about 4 minutes. It's the best choice for those who are interested in building cinewhoop for FPV filming.

Please note that the naked Hero 6 and batteries are not included.

Beta85X comes with a BEC board, which specially designed for GoPro HERO6. Integrated GoPro stock buttons and LED.
Install customized EOS2 V2 camera and A01 VTX,you can enjoy the real-time FPV feds and low RF interference on flight.
Pad is available for pilot to control the GoPro recording via the radio transmitter.
With the pluggable connector, which is easier to connect with your flight controller for power supply and recording.
Equipped with an adjustable camera mount of 0-50° for FPV film shooting. This will be the best choice for building the smallest cinewhoop drone that can carry a naked GoPro HERO6.


Item: Beta85X for Naked Camera
Weight: 67.77g (without GoPro HERO or battery)
F4 AIO Brushless FC 12A V2 (BLHeli_S)
Frame: Beta85X Frame V2
Motors: 1105 5000KV Brushless motor
Props: 2" 4-Blades Props
Receiver Option: TBS Crossfire
Camera: Betafpv EOS V2 Camera
Recommended battery: 450mAh 4s 75C battery (Not including)

85X Cinewhoop with GoPro

In recent months, more and more pilots are interested in the super small, lightweight and powerful cinewhoop. Pilots like Richárd Papp and Tommy Tibajia started their cinewhoop project. Based on the stable and insane power system of Beta85X, Tommy built his Umma85 and keep sharing all his ideas in the group. If you wanna know more about cinewhoop, feel free to join us on Facebook.
>> NAKED Cinewhoop Community

For providing a great combo for FPV community, we design a BEC board which is for the naked GoPro HERO6 perfectly. With the carbon fiber case and pluggable connector, it is easier to plug in and out. Meanwhile, we designed the adjustable camera mount of 0-50°, it can be used for the different flying modes of insane flying or slowing flying.

The idea of Naked Camera

Based on the discussion of the cinewhoop, we designed a BEC board and a fitting case for Naked GoPro HERO6/7 to make it as a whole GoPro Lite camera. With a pluggable connector and a lightweight of 29g, easier to install on your cinewhoop for FPV filming.

So what is the special of the BEC board? It is integrated with the 5V@2A BEC, the stock GoPro buttons, LED and remote recording, solving the problem of the unstable power supply and redundant FPC connect way. The current BEC board fits for GoPro HERO6 and GoPro HERO7 Black.

How to Setup Remote Record

Pilot could use the switch on radio transmitter to start/stop record. Some more configuration needed.

For example, if you use F4 FC V2.0 in the drone, like the 95X whoop drone, the connection diagram is shown below. The yellow cable (FC B12 pin pad) is just for the remote record.

We use the Pinio function in Betaflight to control record. First, setup the Pinio function of the B12 pin in the FC board.

resource FLASH_CS 1 NONE
resource PINIO 1 B12
set pinio_box = 40,255,255,255

Next, map one of the switch channels in your radio transmitter to this Pinio (aka USER1). As shown below, we map the AUX4 channel in the radio transmitter to USER1 Pinio. The cursor in the orange zone means button released and white zone means pressed. So keep the cursor in the orange zone in default.

Third, check if the Pinio function works. Change the switch and make the cursor move from the orange zone to the white zone, and finally back to the orange zone. Now you could check the LED status to know if the record starts. Use the same process to stop recording.

If you use the 12A F4 AIO FC board, like the 85X whoop drone, you will use the LED_STRIP pin (aka A08 pin pad) for the Pinio function.

resource LED_STRIP 1 NONE
resource PINIO 1 A08
set pinio_box = 40,255,255,255

Know more about the Betaflight Pinio function.


1 * Beta85X for Naked Camera
1 * BEC Board for Naked Camera
1 * Case for Naked Camera
1 * GH1.25 Power Cable (80mm 30AWG)
1 * Pack of Screws

List Price: $299.95
Price: $289.95
SKU: 00313747_3

In Stock: Sorry bro, Sold out

BetaFPV Starter Kit 2 RTF


Betafpv has released the Starter Kit 2 in June 2020 - It is an amazing RTF package that competes with the Emax Tinyhawk II RTF. The Starter Kit 2 has a Betafpv LiteRadio 2 Transmitter, BETAFPV VR01 FPV Goggles and Beta65s lite, it is an excellent choice for the beginners. The remote included has a built-in 350mAh 2S Battery, bound and set up before it is shipped out, meaning it is perfect a beginner user. This kit is perfect for someone with no experience or a little experience, everything needed to get into FPV drones in one kit. This is a complete bundle that every pilot will need.

Beta65s Lite has more punch on the throttle with faster 19000KV 7x16mm motors and 3-blade propellers. It is a new version with a new BETAFPV Lite brushed flight controller, easy to operate, suitable for beginners.

Comes with a highly praised independently developed remote control, makes the starter kit 2 go to a higher level of cost-effectiveness. What's more, LiteRadio 2 Transmitter is bound to the Beta65s lite before it shipped out. Perfect for a first time user.

With 4.3 inches 800*480px HD high brightness LCD, bringing an immersive VR effect.

Come with 2 batteries, 1 electric display charger and charging cable parts, super portable for charging. Customized EVA case, convenient to take out. Enjoy flying it anytime, anywhere.

Beta65s Lite Drone

Beta65S Lite is a new version with BETAFPV Lite brushed flight controller. Powered by Silverware firmware, much simpler and affordable. It is ready to fly and the Silverware software does not require switch settings like Betaflight does.

Power: 1S
battery: 300mAh 1S Lipo Battery
Frame: New Beta65S Lite V2 Frame
Motor: 7x16mm 19000KV Motor
Props: Gemfan 40mm 3-blade propeller(1.5mm shaft)
FC: Lite 1S Brushed FC
Camera: C01 Camera
Canopy: Canopy for Micro Camera

LiteRadio 2 Transmitter

Designed for FPV racing starters, LiteRadio 2 is powered by OpenTX firmware. A total of 8 channels and has hobby-grade gimbals. The trainer function is available for this LiteRadio 2 transmitter. It is useful for FPV racing students in training.

VR01 FPV Goggles

BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inches 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopts an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband.
Parts List

Provided 2 batteries, 1 electric display charger and charging cable parts, super portable for charging. What's more, the Batteries, USB charger and Spare parts for easy repairs.

1 * Beta65S Brushed Whoop Drone
1 * LiteRadio 2 Transmitter
1 * VR01 FPV Goggles
1 * 1S USB charger (mCPX , MOLEX , JST)
1 * Battery voltage tester
1 * 300mAh 1S 30C Battery

List Price: $239.95
Price: $229.95
SKU: 00313751

In Stock: Totally in stock right now

TBS Solder 100g Dia 0.8mm


Premium leaded solder with integrated flux to make any solder work a breeze!

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional.

Type: Leaded
Tin/Lead: 63/37
Flux: 1.8%
DIA: 0.8mm
N.T: 100g

List Price: $10.90
Price: $10.90

In Stock: Totally in stock right now

TBS Solder 15g Dia 1.0mm


Premium leaded solder with integrated flux to make any solder work a breeze!

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks professional.

Type: Leaded
Tin/Lead: 63/37
Flux: 1.8%
DIA: 1.0mm
N.T: 15g

List Price: $5.90
Price: $5.90

In Stock: Totally in stock right now

ORT Dual Shield Pro 5.8GHz Antenna (RHCP)


Old Radio Transmissions (ORT) has carefully designed the Dual Pro 5.8GHz Patch Antenna to fit all available Fat Shark Diversity Receiver Modules on the market. This antenna consists of two micro shield patches with a 6.5dBi each. A must-have!


Not a mimo antenna!
Easy, Plug & Play setup. 3D printed antenna mounts firmly to your goggles using 3M VHB Tape.
Fits your Fatshark goggles without any hassle of attaching & detaching before and after each flight session.
Smooth, high-quality 3D printed mount with 20 degrees panning of each antenna and 10 degrees upward tilt with overlapping beams to get the widest coverage.
Consists of 2 O.R.T. Micro Shield Patches each with 6.5dBi gain
High-quality RG316 black jacket feed lines.
Carefully designed to fit all available Fat Shark type diversity receiver modules on the market.
Works perfectly not only with modern diversity such as RapidFIRE, Clearview or TruedX, but also regular diversity like OWLrc, TrueD 3.8, RealAcc, Eachine and AKK.
You can still use your favorite Omni/directional combination antenna (if needed) without the need to detach your Dual Shield PRO from your goggles(strongly attached, thanks to 3M VHB tape provided).


Gain: 6.5 dBi
Weight: ~30g
Polarization: RHCP
Connector: SMA
Color: Black/White

List Price: $46.90
Price: $46.90

In Stock: Sorry bro, Sold out

TBS Unify Pro 5G8 SMA Pigtail Right Angle 90°(MMCX) Cable


MMCX to SMA Pigtail for connecting SMA antennas to MMCX type VTX

List Price: $8.90
Price: $8.90
SKU: TBS-1031

In Stock: Totally in stock right now

Ethix FPV Mini Screen


Introducing the Ethix Mini 5.8GHz Analog Mini FPV watch/screen. After literally years of going through different production ideas for ways to better this little guy. We finally deciding it’s more about the simplicity of use rather than adding all the bells and whistles of a DVR. Obviously keeping things simple also helps the end user save on cost as well. We decided to go with the most user friendly FPV watch style mini monitor out there, 2 buttons, band scan, and 48 channels.

This easy to use little monitor will make your life a breeze whether you’re working on quads at home and need to check your FPV feed or out in the field and needing to show some bistanrds how amazing this hobby is. The Ethix Mini FPV Monitor has you covered.

List Price: $64.90
Price: $60.00

In Stock: Totally in stock right now

TBS Gear Pouch


The TBS Gear Pouch can comfortably accommodate a Tango2 and FPV goggles (Fatshark size). The walls and dividers are well padded for protections.

The lid of the pouch has a elastic rention system and small pouches for you to store your cables, tools, antennas and etc.

Size: 250L x 190W x 90H (mm)
Weight: 190g
Material (Exterior): Nylon
Material (Interior): Velcro-receptive fabric with padding


1 x TBS Gear Pouch
2 x Long Padded Dividers
1 x Short Padded Dividers

List Price: $20.90
Price: $20.90

In Stock: Sorry bro, Sold out

ImmersionRC RF Power Meter V2


ImmersionRC RF Power Meter V2

Every FPVers Toolbox Needs One…

FPV is made possible thanks to two RF links, a control link, and a video link. Without an RF Power Meter a pilot has no way to test these critical RF links.
Test equipment for microwave (GHz) links is not cheap. ImmersionRC changed this several years ago, and provided our ‘Power Meter v1’ to the FPV community. The v2 is the result of listening to customer feedback. We added an internal battery an internal attenuator, and a few features that every FPVer needs.

Accurate RF Power Measurements

Is the latest whiz-bang hype-train vTx really as good as the datasheet claims? Does it really emit 25mW on all race channels? Does it still emit 25mW 30 minutes later?

The RF Power Meter v2 allows these questions, and many more to be answered.

Back in the early days of FPV racing ImmersionRC pioneered low-power racing, where everyone runs 25mW. This became a world-standard within a few short months, and continues to be the standard today. The Power Meter v2 gives you the measurement tool that you need to test transmitters, before you get surprised at the next race.Touch-Free Race Compliance

Are you ready to test your video transmitter before the hammer comes out?
With the included stubby dipole, the RF Power Meter v2 is all that you need to perform a rough power test on any FPV platform, even without unscrewing it’s antenna.

Calibrate the meter on a ‘known good’ platform, and walk down the start grid testing each quad ready to race. Quads accidentally set on high power (hammer-ready), or those with hardware/cable/connector/antenna problems emitting a few micro-watts are identified before the first gate.
We call this ‘Scully Mode’ for a good reason. Joe Scully, the best FPV MC in the business, perfected this test technique to ensure successful race meets on all four corners of the globe.

PowerScope Mode

So you know that ‘packets’ of data are flowing from your R/C Tx, or Long Range system, to your model… but what if you could ‘see’ them?.
The PowerScope mode of the RF Power Meter v2 presents you with a visual representation of the power being emitted from your radio.
How fast are they packets emitted? are the multitude of antennas in your radio working? where are they? what orientation?
You can even spot transmitters which comply with LBT (listen before talk), or Duty Cycle limitations.
Yeah, it is a geek tool, but it does impress the opposite sex!

Average, or Peak Measurements

Analog Video Transmitters emit a steady stream of RF goodness. R/C Controllers emit a stream of pulsed goodness (which just happens to be heading in the opposite direction).

The RF Power Meter v2 can deliver accurate power measurements for both types of RF signals.

Integrated Li-ion Battery

The v2 contains an integrated Lithium Ion battery, which will power the meter for at least 8 solid hours. With auto-shutdown after periods of inactivity, a single charge will power your meter for days at the race track.
Recharged using a standard micro-USB connector in less than one hour.

Manual available here


Power Level: -20dBm up to +30dBm
Calibrated Frequencies: 35, 72, 433, 1200, 2400, 5600-6000MHz in 50MHz steps
Accuracy: +/- 0.5dB
Attenuator: 30dB (Internal)
Battery: 3.7V Lithium Ion cell, 10440 size, 600mAh
Current Consumption: ~35mA
Battery Life: ~8 hours
Auto Shutdown: 5 minute timeout
Charging: Micro USB cable
Display: OLED, 128×64 pixels, monochrome
User Input: Joystick
Interfaces: USB, power control via CDC
Antenna: 5.8GHz ‘Sniffer Antenna’ (linearly polarized ~2dBi dipole)
Adapter: Male to Male SMA adapter

List Price: $149.95
Price: $139.95

In Stock: Sorry bro, Sold out

ToolKitRC M8 300W 15A Charger / Cell Checker / Servo Tester - White


The ToolkitRC M8 is much more than just another charger! With a 300w 15A Charger at its heart, the M8 also has a servo tester, cell checker, a watt meter, PWM/PPM/Sbus input testers and output generators along with a variable voltage and amperage DC output control.


Battery Charger
Cell Checker
Servo Tester
PWM,PPM.SBUS Input/output Receiver & Flight control tester
Viable AMp/volt DC Power supply (Required external DC input)
Available in Black or White, please select from drop-down before adding to cart


Charge, discharge and balance management support LiPo, LiHV,
LiFe 1-8S,NiMh 1-20S,PB 1-12S battery.
Charger current:MAX 15A @ 300W
Discharge current:reccycle mode 15A @ 300W Normal: 3A @ 20W
Balance current: 400mA @ 2-8S
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
ESC power meter, together with output voltage and throttle signal
Measure PWM / PPM / xBUS signal values, Accuracy 1ms
Output PWM / PPM / xBUS standard signal, Accuracy 1ms
Customizable 5-30V constant voltage, 1-15A constant current
Charge the drone battery, activate and charge.
Multi-language optional
USB 2.1A@5.0V Output,for Mobile devices
Udisk firmware upgrade (Slave device)


Input voltage: 7.0-30.0V @MAX 16A
Type of battery: Lipo LiHV LiFe @1-8S
NiMh @1-20S Pb @1-10S
Balance current: 400mA @2-8S
Charge power: 300W @MAX 15A
Discharge power: 300W @MAX 15A Recycle mode
12W @ 3A Normal mode
USB: 2.1A @5.0V or Upgrade
Dimensions: 98*68*35 mm
Weight: 142g
LCD: 2.2inch, 132*64 Pixel,black and white


PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Voltage: 1.0-5.0V @1-8S
IR: 10-500mR @1-8S
ESC: 300W @Max 15A


PWM: 880-2200us @20-400Hz
PPM: 880-2200us*8CH @20-50Hz
SBUS: 880-2200us*16CH @20-100Hz
Power: 1.0-30.0V @1.0-15A Mode:CC+CV
OverCurrent Cut Off time: 50ms

User Manual & Firmware

Error Codes

1.over current
3.over temperature
5.battery is invalid
6.input low
7.input is too high
8.balance is complete not connected to the balance port
10.not connected to the main port
12.types do not match
13.cells error
14.battery needs to be balanced
15.This mode is not rechargeable

List Price: $69.95
Price: $69.95
SKU: HP110-0001-W

In Stock: Totally in stock right now