New Bits

4066 KBDD 250 Size Tail Blades - Neon Green


$3.30

KBDD Green 200/250 Tail Blade/40mm

List Price: $5.00
Price: $3.30
SKU: KBDD-4066


In Stock: Totally in stock right now

4068 KBDD 250 Size Tail Blades - Black


$3.30

KBDD Black 200/250 Tail Blades/40mm

List Price: $5.00
Price: $3.30
SKU: KBDD-4068


In Stock: Totally in stock right now

4207 KBDD 4mm Paddles 90 Size - Neon Orange


$3.30

KBDD paddles are perfect for aggressive 3D flying. A unique feature of these paddles is the (2) flybar mounting hole locations. This feature allows for fine tuning of cyclic response and pitching in fast forward flight (FFF)

Features:
-Holes for 4mm fly bar
-Length: 95mm
-Weight: 17.5g (per paddle)

List Price: $14.00
Price: $3.30
SKU: KBDD-4207


In Stock: Totally in stock right now

4205 KBDD 4mm Paddles 90 Size - Neon Yellow


$3.30

KBDD paddles are perfect for aggressive 3D flying. A unique feature of these paddles is the (2) flybar mounting hole locations. This feature allows for fine tuning of cyclic response and pitching in fast forward flight (FFF)

Features:
-Holes for 4mm fly bar
-Length: 95mm
-Weight: 17.5g (per paddle)

List Price: $14.00
Price: $3.30
SKU: KBDD-4205


In Stock: Totally in stock right now

4206 KBDD 4mm Paddles 90 Size - Neon Green


$3.30

KBDD paddles are perfect for aggressive 3D flying. A unique feature of these paddles is the (2) flybar mounting hole locations. This feature allows for fine tuning of cyclic response and pitching in fast forward flight (FFF)

Features:
-Holes for 4mm fly bar
-Length: 95mm
-Weight: 17.5g (per paddle)

List Price: $14.00
Price: $3.30
SKU: KBDD-4206


In Stock: Totally in stock right now

4208 KBDD 4mm Paddles 90 Size - Black


$3.30

KBDD paddles are perfect for aggressive 3D flying. A unique feature of these paddles is the (2) flybar mounting hole locations. This feature allows for fine tuning of cyclic response and pitching in fast forward flight (FFF)

Features:
-Holes for 4mm fly bar
-Length: 95mm
-Weight: 17.5g (per paddle)

List Price: $14.00
Price: $3.30
SKU: KBDD-4208


In Stock: Totally in stock right now

Long Nose Pliers


$7.50

Long Nose Pliers

List Price: $7.50
Price: $7.50
SKU: KDS-LNPliers


In Stock: Totally in stock right now

Scorpion Brushless Motor Keychain


$9.95
List Price: $9.95
Price: $9.95
SKU: SPN-KEYCHAIN


In Stock: Totally in stock right now

Scorpion HK-3026 V2 Motor Shaft Kit


$11.00

The Scorpion HK-3026 motors are built with 5mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory repalcement shafts for all the HK-3026 series Scorpion Helicopter Motors. Our Motor Shaft Kits include an original equipment factory shaft with the setscrew keyways already cut, a new spacer washer, and a set of 2 retaining clips. This way, when one goes flying and bounces off the wall while you are trying to install it, never to be found again, you still have another one to try again!

The shaft for the HK-3026 series motors measures 5mm in diameter, and is 74mm in long. The shaft kit will also fit other brushless motors that require a 5mm shaft of this length. This shaft kit will work with the newer version HK-3026 motors that have the C-clip retainer, and it will also work with the older style motors that had the retaining collar with set screws. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front houshing of the motor supported in a block of wood to prevent warping the front housing.

List Price: $11.00
Price: $11.00
SKU: SPN-MS-3026V2


In Stock: Totally in stock right now