Product Search

IBCrazy Replacement Cover for Mad Mushroom / Airscrew


Damaged your 5.8GHz Bluebeam or Duraspec antenna's cover in a crash? Well don't worry, we have you covered. With this 3-Pack of Replacement Covers, you can be sure your Airscrew, Madmushroom or RHCP DuraSpec will last through more crashes than if you simply left off the damaged cover.

Package includes: 3 Blue Covers for Bluebeam Ultra Style and DuraSpec antennas

$11.00
$11.00


In Stock: Totally in stock right now

IBCrazy Semi Rigid Dipole UHF Receiver Antenna (433mhz)


A 433 MHz omnidirectional simi rigid dipole antenna from IBCrazy.

This antenna can be used with your UHF transmitter and receiver. The antenna can be installed vertically or horizontally to match your aircraft polarization.

$22.95
$22.95


In Stock: Totally in stock right now

IBCrazy UHF Moxon Rectangle 433 MHz


This antenna upgrade is perfect for extending the range of your LRS/UHF system.

The Moxon rectangle is essentially a 2 element Yagi with the elements bent to direct the signal forward. The advantages of this antenna is the very high F/B ratio of about 25. Unlike the Yagi which has deep nulls to the sides, the Rectangle has it’s nulls to the rear. This makes for an excellent LRS/UHF FPV antenna.

It has a good frontal sweep of nearly 180 degrees and allows you to fly to the sides of the antenna without excessive degradation of signal. Do not fly behind yourself with this antenna. Gain is 5.75 dbi. Range boost is ~70%.

$55.00
$55.00


In Stock: Totally in stock right now

IBCrazy1.3/2.4GHz Notch Filter


Notch filter from IBCrazy. Use this on your 1.2-1.3GHz video transmitter to filter out interference in the 2.4GHz spectrum.

New Compact Design.

$17.50
$17.50


In Stock: Totally in stock right now

ImmersionRC / Fatshark Folding Travel Chair


This small lightweight chair folds into a small travel bag that is easy to bring to the field. The red anodized adjustable legs can set both height and angle and have rubber feet for grip on hard surfaces. The Synthetic cover is made of mesh that's breathable and quick-drying so you can sit comfortably no matter what the weather. The legs self assemble with shock cord running through each part making setup quick and simple.

Specifications:

Material: Aluminum 7075 / 600D Ripstop PVC
Size: L69 x W53 x H37cm / Packed: L36 x W12 x H12cm
Weight: 1000g
Capacity: 150Kg / 330lbs

$59.95
$59.95


In Stock: Totally in stock right now

ImmersionRC 433MHz 'Sander Style' Whip Antenna


This simple, lightweight, 433MHz antenna is included with our EzUHF receivers.

Right-angle SMA connector with a piano-wire whip, flexible enough to survive some serious abuse. Tell you what though, getting it caught up in your propellers will make a mess of it.

$5.00
$5.00


In Stock: Totally in stock right now

ImmersionRC Branded Battery Straps 20cm x 1.5cm 4pcs


High quality battery straps, as shipped with ImmersionRC's Vortex.

ImmersionRC Branded
20 cm long, 1.5cm wide
Extremely strong

$9.90
$9.90


In Stock: Sorry bro, Sold out

ImmersionRC EzUHF 4ch Lite Rx


Featherweight Long-Range R/C receiver Ideal companion to the EzUHF transmitter. Single-board design, weight only 8g. Sensitive receiver, range comparable to its 8 channel big-brother. Ideal for medium range flights, with lightweight foam models, without any safety risk.

Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
433MHz/70cm Ham band operation
-113dBm Sensitivity
Ceramic filtered input, eliminates nearby high-power video Tx interference
Mikrokopter mode, emits PPM (8 channels!) on a chosen channel
Vehicle mode, couples two chosen channels (ideal for coupling steering servos on monster trucks)
USB Connection for easy firmware upgrades, and advanced configuration
Standard SMA antenna connector, compatibility with standard 433/70cm band antennas
4 standard servo connectors
Failsafe, preset by button on the EzUHF transmitter
Power Requirements: 4.8v - 6v, 33mA

$69.00
$69.00


In Stock: Totally in stock right now

ImmersionRC EzUHF Long Range RC Transmitter


The EzUHF transmitter is a true powerhouse with a wealth of connectivity broadening the horizon for each FPV pilot. Headtracking support has now been taken out of the hands of the RC transmitter and is exclusively handled by the EzUHF transmitter, so any radio can be used with your TrackR2 now. Support for any radio battery voltage is guaranteed as well, as the EzUHF transmitter has a power-in jack which will accept a 3S LiPo, so no soldering in your precious RC transmitter is required. For Futaba systems using a 9.6V battery or 3S LiPo the EzUHF transmitter can be powered directly from it, with just a single cable. The battery voltage, either from the external battery, or provided by the radio, obviously is monitored and an audible alarm will sound when the battery gets low.

The EzUHF transmitter comes with an auxilary input that’ll offer exciting upcoming new features for FPV/UAV use. The EzUHF transmitter also comes with a power boost switch, which boosts the power if you happen to put yourself in a tight spot and need to regain control. And we’ve not even touched upon the full duplex capabilities of the EzUHF solution, which is exclusively available on the EzUHF transmitter and the 8-ch EzUHF receiver, turning both into full blown transceivers and opening the door for exciting future possibilities.

Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
433MHz/70cm Ham band operation
GFSK modulation
600mW (~28dBm) output power
Direct head-tracker input, adding head-tracker compatibility to most radios
Power switch, boost power when at long range
Standard SMA antenna connector, compatibility with 70cm antennas
Flexible buffered, AC-coupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels
Standard USB port (Mini-A) for firmware upgrades, and system configuration
Single pushbutton learning of failsafe positions
Binding function, which allows binding Single Tx->Rx, Multi Tx->Rx, and Single Tx->Multi Rx
Mates with 8 channel, and 4 channel EzUHF receivers
Power sourced directly from the R/C Tx (Futaba), or optional DC power jack
Built in receiver, for future expansion
Custom extruded brushed aluminum enclosure
But there’s more, as all EzUHF products feature a common USB connector which, in combination with our application software, will allow you to set up your receivers in just the way you like. Mikrokopter mode, the cloning of channels, diagnostics, firmware updates, etc. etc. all available with the click of your mouse or a press of a button, no soldering required, nor any fancy non-standard cable. Convenient, simple and intuitive, leaving you with more time to enjoy your flying, rather than spending hours or days setting up your equipment.

All of that and many, many more upcoming features which further allow integration of our products and turn the electronics powering your FPV plane into a reliable, rock solid, but above all a plug ‘n fly solution that you get to enjoy every time you fly.

Documentation

EzUHF Firmware Upgrade & Bind Procedure
EzUHF Manual

Notice: The use and operation of this product in the Australia and many other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that you comply with the rules and regulations regarding radio transmitters in your country. We are not responsible for your actions if you choose to use this product.

$125.00
$125.00


In Stock: Totally in stock right now

ImmersionRC EzUHF Nano Reciever


EzUHF Long-Range R/C Receiver, 3 Channel PWM (Wings), 12 channel PPM or SBus (quads)

Tiny 5 gram package, 8 x 24 x 27mm (with hard plastic case installed)

** New firmware available to support low-latency control for Multicopter use, with SBus receiver output. **

Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
433MHz/70cm Ham band operation
-112dBm Sensitivity
Bi-directional ready (contains on-board transmitter)
ceramic filtered inputs, eliminates nearby high-power video Tx interference
PWM, PWM, and SBus modes
USB Connection for easy firmware upgrades, and advanced configuration
Miniature MMCX connector, supplied with MMCX to Bulkhead SMA connector
Standard SMA antenna connectors, compatibility with standard 433/70cm band antennas
Failsafe, preset by button on the EzUHF transmitter

$59.95
$59.95


In Stock: Totally in stock right now

ImmersionRC FatShark SpiroNet RHCP Mini Patch 5.8Ghz Antenna (SMA) 8dBi Gain


This ImmersionRC 5.8GHz Left-Hand (LHCP) or Right-Hand (RHCP) Circular Polarized Mini patch antenna was custom-designed, with no expense spared, for the FPV market. Light enough to be mounted directly onto an LCD headset, or directly onto the front of one of the Immersion Uno, or Duo receivers.

Precision manufactured with very tight tolerances, *each antenna* is 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance
SMA male connector compatible with all FatShark/ImmersionRC 5.8GHz products sold to date
Choose between Left-Hand or Right-Hand circular polarization (LHCP or RHCP)
5.8GHz ISM Band
8dBi gain
Beam width -3dB at +/- 45 degrees (H + V) (90 degree total)
F/B Ratio >356dB
VSWR < 1:1.35 at 5800MHz
Impedance 50 ohms
Weight 7g

$38.95
$38.95


In Stock: Sorry bro, Sold out

ImmersionRC LapRF Personal Race Timing System - LAPRF1


The ImmersionRC LapRF is a personal race timing system for FPV quads using 5.8GHz video feeds.

The passing of a quad through the start/finish gate is precisely measured using the energy emitted by the 5.8GHz transmitter on the quad.

Custom fully-programmable timing receivers, coupled with ImmersionRC's timing antennas ensure that the performance of this system is on a different level than competing products.
Video power levels from 10mW through 600mW supported.

Super-precise with one pilot, but also supporting multiple pilots for smaller events without purchasing multiple units (up to 8 with lower gate speeds as found in the micro-quad world) - up to 4 units with high speed

Bluetooth connection to Android and iOS devices, with free applications downloadable from their respective app. stores.

Fully integrated with the industry standard LiveTime event management software.
Integrated 2600mAh Li-ion battery, with integrated USB charger gives 8 hour race time.

Manual for ImmersionRC LapRF personal available here

Easy To Use

It doesn’t get much easier. Power on the LapRF, drop it in the start/finish gate, select its ID in the free Android/iOS app, select the number of pilots, and video channels used, and start racing.

The LapRF will run all day, measuring lap times and speaking the results. There is no better tool to allow pilots to measure their performance, and work to improve it

No More Transponders!

The lapRF uses the Radio Frequency energy emitted by the Video Transmitter on the model to detect its presence within the race gate.

The current generation of racing drones have two things in common, they all use 5.8GHz video downlinks, and they all need to be on different channels to race together. This is all that the lapRF system needs to precisely time events.

No RFID transponders, no Infra-Red transponders, no complex installations. Just place the lapRF system in the start/finish gate, and start racing.

Bluetooth Link to Phones and Tablets

The LapRF Personal Timing System includes a bluetooth module which can quickly link an iOS or Android device to the gate.

Enter pilot names, start the race, and the lap times will be spoken along with the pilot’s name. All lap times will be shown in a table, along with average, and best lap times.
Any loss of Bluetooth connection will not result in loss of lap times. When Bluetooth is reconnected, all missed lap times will be transferred to the app.

Personal… but Shareable

The LapRF Personal Timer was designed to be used by one pilot, that is where it is the most precise. But if you want to invite a few friends along for a quick race around the park, we support that too, out of the box. No need to figure out how to interface your mates timers together, or run multiple apps, just share yours. Timing resolution (which is more than enough with one pilot) decreases as you add more pilots, but when you start with more than enough, and share, you end up with just enough.

Integrated 2600mAh Battery

Integrating a high capacity, but common 18650 battery (available from vape shops worldwide) the LapRF doesn’t need an external power supply.

To allow quick in-the-field replacements, we included a handy battery door in the bottom of the unit, minimizing down time during battery changes.

When it is time to recharge the battery, the integrated charger just requires a USB hookup, no need to remove the battery.

Custom Timing Receivers

Instead of using a standard receiver module in the timing system, ImmersionRC’s hardware engineering team designed a custom module, which can be calibrated on-the-fly to adapt to the different power levels found in races.

Sensitive enough to detect passing quads, but selective enough to ignore adjacent channel interference. Heavily filtered to ignore off-band interference common at race events.

To top it all off, we designed custom antennas with gate-shaped beams which let you precisely define the detection area of the timing system (something that competitive units sorely lack). These antennas are designed for RHCP/LHCP, and Linear polarization, covering everything that will be seen at a race event.

LiveTime Integration

The ImmersionRC LapRF Race Timing Systems are both supported by the industry-leading LiveTime Scoring Engine.

Full integration of the personal system via USB, or the event system via Ethernet, including full auto-calibration of the timing system, and even a built-in Spectrum Analyzer to analyze event background noise.

Hands-Free Control from Apple Watch

This is a little feature that sounds like a gimmick, but in practice works quite well.
Your race is configured, your fellow pilots are ready to race, goggles down, and now you need to take your phone/tablet from your pocket to hit the start button.

Nope, just reach to your wrist, hit the start button, and wait for the adrenaline buildup that accompanies most race starts.

Of course, as an added bonus, this doubles your bluetooth range!. Just leave your phone/tablet within range of the timing system, and use your watch to remotely control it from up to 100m away.

Pimp your Puck!

During development, we referred to the lapRF personal edition as the ‘Timing Puck’ (its resemblance to a hockey puck apparently had something to do with that)

Pimping your Puck therefore seems an appropriate way to refer to customizing your timing puck, making it stand out from the crowd, in the same way that our Vortex community loves to pimp their quads

Several ‘pimp kits’ will be offered soon after product release, in colours defined by the community.

Connex ProSight Compatible

The LapRF is just as comfortable in the digital world as analog. Many successful mixed Analog and Digital races have been run by race director Joe Scully with a great deal of success.

NOTE: Prosight units must be placed in fixed-frequency mode in order to connect pilots and channels.

External BT Antenna for More Range

A sleek internal Bluetooth antenna gives more range than most pilots need.
For extra range, the LapRF casing has the ability to use a standard U.FL to SMA cable, and 2.4GHz antenna (not included, but easy to source)

Link to manual can be found here.

$139.95
$139.95


In Stock: Sorry bro, Sold out

ImmersionRC RapidFire Goggle Receiver Module


The rapidFIRE technology the rapidFIRE module is named after 'fuses' together the images from two 5.8GHz A/V receiver modules into one beautiful, interference-free image. Tearing and rolling are eliminated and our advanced noise-detection algorithms guarantee a clean and stable image at all times. The rapidFIRE module is optimized for use in environments with multi-path interference such as indoor racing, flying in abandoned buildings etc. but also offers superb sensitivity and selectivity outdoors and for long range use.

The rapidFIRE module is compatible with all Dominator LCD goggles including V1, V2, V3, SE, HD1, HD2, HD3, HDO, and Attitude V3 and V4. To guarantee this compatibility is ships with injection molded and beautifully painted module bay doors for Dominator and Attitude goggles.

For Attitude and HDO goggles, the module is plug and play. For others, an included headtracker-bay aux power board, with flat-flex cable, is included which is recommended to be used for best results.

As expected from ImmersionRC we've future-proofed the rapidFIRE module by equipping it with an USB port, allowing future firmware updates and the adding of new features through our Vortex configuration app.

The rapidFIRE module enables easy menu navigation by means of a 5-way joystick which is used to scroll around the menus that are displayed on a responsive OLED display on the outside of the module, with feedback of critical parameters displayed on the OSD.

Key features included are a built-in spectrum analyzer, favorite channels with live single-channel spectrum display for manual tuning, band scanning and many, many more.

When used to time races, the rapidFIRE technology eliminates dropped frames from the FatShark DVR. Finally DVR footage can reliably be compared for photo-finishes.

$233.00
$233.00


In Stock: Totally in stock right now

ImmersionRC SpiroNet 5.8GHz Antenna Set (LHCP)


SpiroNET 5.8GHz circular polarized antenna from ImmersionRC and FatShark. Left Hand Polarization!

Set includes (x2) 4 lobe skew planar antennas.

Precision manufactured with very tight tolerances, *each antenna* is 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance.
Antenna uses a high quality semi-rigid cable, that can be bent to any angle and maintain its shape in any orientation.
The custom radome is RF-transparent, and protects the antenna from the occasional crash, or that oops moment when flying.
SMA male connector compatible with all FatShark/ImmersionRC 5.8GHz products sold to date.
Left-hand circular polarization
Notes:

- When flying mutiple pilots at once, on 5.8GHz, interleaving RHCP and LHCP antennas will allow 2x the number of pilots to fly at once.

- A LHCP Omni should be used on both the model, and the receiver (goggles/LCD) of pilots flying on adjacent frequencies to pilots flying with RHCP antennas.

- The LHCP versions of the SpiroNET antennas do not replace the RHCP versions, and are not compatible with them.

$56.95
$56.95


In Stock: Sorry bro, Sold out

ImmersionRC SpiroNet 5.8GHz Antenna Set (RHCP)


New SpiroNET 5.8GHz Right-hand circular polarized antenna from ImmersionRC and FatShark.
Set includes two identical 4-leaf Skew Planar Wheel antennas.

Right-hand circular polarization, Standard SMA male connector (NOT RP-SMA)

- Precision manufactured with very tight tolerances, *each antenna* is 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance.

- Antenna uses a high quality semi-rigid cable, that can be bent to any angle and maintain its shape in any orientation.

- The custom radome is RF-transparent, and protects the antenna from the occasional crash, or that oops moment when flying.

- SMA male connector compatible with all FatShark/ImmersionRC 5.8GHz products sold to date.

- Right-hand circular polarization

$56.95
$56.95


In Stock: Sorry bro, Sold out

ImmersionRC SpiroNet 5.8GHz Antenna Set (RHCP) (RP-SMA)


SpiroNET 5.8GHz circular polarized antenna from ImmersionRC for use with BOSCAM transmitters and receivers that use RP-SMA connectors. NOT COMPATIBLE WITH FatShark, ImmersionRC, or other equipment using standard SMA connectors unless you are using an adapter.

Set includes 3 lobe and 4 lobe skew planar antennas.

Right-hand circular polarization.

Unique design, not seen before in the FPV world. Far from the run of the mill 'basement production' seen to date.
Precision manufactured with very tight tolerances and 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance.
Antenna uses a high quality semi-rigid cable, that can be bent to any angle and maintain its shape in any orientation.
Extra long cable on the Skew antenna to clear your head (which blocks 5.8GHz emissions) for goggle installation.
The custom radome is RF-transparent, and protects the antenna from the occasional crash, or that oops moment when flying.
RP-SMA connector compatible with BOSCAM equipment
Right-hand circular polarization

$56.95
$56.95


In Stock: Sorry bro, Sold out

ImmersionRC Tramp HV 5.8GHz Video Tx V2


The ImmersionRC Tramp HV 5.8GHz Video Tx is one of the most advanced 5.8GHz Video Transmitter available today. Only 4 grams, and a slender 31 x 20mm, the TrampHV is also a small direct LiPo-powered vTx.

Smallest, Lightest in the Business

This is the smallest, lightest, high-power, high-voltage A/V Transmitter in the business, 31 x 20mm, with a slender 17mm waist, weighing only 4 grams!

Even at this size, the traditional ImmersionRC 5V filtered camera power supply is also included. Twin ground cables from the tiny locking connectors ensure that noisy supply currents keep the camera supply clean.

To cap it off, in addition to running directly from a 2s-4s (HV) LiPo, the TrampHV will happily run from a 5V supply already available in the quad.

Features
Smallest direct LiPo powered vTx in the business.
TNR Touch-free wand control (optional)
Traditional button+LED control of frequency and power
1mW -> 600mW linear power control*
All 40 standard channels**
Built-in thermal protection
Factory power normalisation
Glitch-Free frequency changes
Micro-power pit mode
Additional channels for race events (Race Wand only)
Retail regional locking without opening package

Specifications

Dimensions: L=32mm x W=14mm x H=5mm
Weight: 4g (Tx only, without SMA cable)
Power Output: Programmable, 1mW to > 600mW*
Channels: 40 standard**, arbitrary using race wand
RF Impedance: 50 ohms
RF Connector: U.FL
AV Connector: JST-GH, 6 pin, locking
TNR Connector: JST-GH, 4 pin, locking
Audio: Mono, Subcarriers on 6.0 and 6.5MHz (cloned)
Modulation: FM, Audio and Video
Pit Frequency: User/Race Organiser Definable
Video Impedance: 75 ohms
Power Requirements: 2s-4s HV Lipo
Power Consumption: ~4W max. @ 600mW, ~1.9W @ 200mW
Downloads

Download the TrampHV User Manual

Pit Mode

The ImmersionRC TrampHV was the first transmitter to support Pit Mode, which was introduced successfully at the FPVAirShow in France. Pit mode transmits a tiny amount of power on a pre-defined frequency to allow for quad setup at a race event without disrupting the show. Pit mode on the TrampHV is a little different than other offerings, being controlled by race directors transparently at drone races. A race director can stay legal by choosing a pit frequency authorised for use at the event, which can be different for events in different regions. Programmed at the event using the Touch’n’Race wand.

Touch ‘n’ Race for Race Directors

Touch’n’Race, a patent-pending technology which helps both the casual racer, and race directors alike.

Transmitters are placed in Race mode upon arrival at a race event, and remain in that mode until the event is over. Race directors can, without powering up a model, define the frequency and power output of the transmitter, in 5 seconds flat before a race starts.
As soon as the race is over, and the battery disconnected, the TrampHV reverts to it’s race-director defined mode. Massively decreased inter-heat times are possible with this technology, meaning more practice runs, more qualifiers, and races which start and finish on-time (a rarity in the world of drone racing today). More importantly, the chances of a race being disrupted by an accidental power-up in the pits are eliminated, a dream for race organisers.

Touch ‘n’ Race for Pilots

Why let race directors have all the fun?. The personal TNR wand* avoids dip-switch hell even in the local park. Touch-free programming of video transmitters before you launch, eliminating frequency collisions, eliminating the ‘what channel was I on last’ question, and allowing power levels to be modified between flights to adapt to local conditions. Note that the wand is not required to operate the transmitter. A traditional button + LED user interface may also be used to program channel, band, and power level.

Thermally Protected

We have all experienced long delays at the starting grid before starting a race. No airflow over the electronics and video transmitters overheating. Most video transmitters (even the higher end units) have no thermal protection whatsoever and will happily cook themselves and prematurely fail. The TrampHV is a little different. It constantly monitors the temperature of the Tx, and gracefully reduces power output to increase battery life and protect the transmitter. As soon as the props start spinning, it detects the temperature reduction and quickly boosts power output.

Screened for Protection, and Certification

The only Video Transmitter in this size and weight class with a fully screened RF deck, providing protection against dust, dirt and knocks, while ensuring smooth sailing through the RTT&E certification process. An optional plastic case can be easily installed to increase this protection even further, without adding excessive size and weight.

LapRF Certified

The TrampHV was designed alongside ImmersionRC’s RF Lap Timing system, with certified compatibility. LapRF eliminates the need for transponders on the quad for lap timing, and instead uses the energy emitted by the 5.8GHz transmitter on the quadcopter. Two LapRF versions will be available, a 16-channel race version for larger events, and a personal system no larger than a hockey puck for personal use (up to 4 pilots). Both versions sport a wireless connection to a smart phone for timing and configuration.

Anti-Glitch

Another first, introduced by ImmersionRC at FPVAirRace, is technology which allows video transmitters to power up cleanly on their assigned channel without wiping out neighbouring channels. Gone are the days when your fellow pilots need to hover safely why you power up beside them. This technology enables asynchronous race starts, where pilots join a race at any time without creating any interference.

Calibrated Power

Each and every TrampHV is factory calibrated to ensure precise power outputs, especially at the critical low-power race levels. No more cross-talk from 25mW transmitters which are instead emitting 200mW!, or worse, 25mW transmitters which emit much lower power levels. No more RF lap timing issues caused by pilots running wildly different power levels.

NOTES

* AU Version is locked to 25mw max power output

** AU Version has non ISM bands locked out and operate between 5725-5866mhz

Export only version is not for use in Australia.

$48.95
$48.95


In Stock: Sorry bro, Sold out

ImmersionRC Uno5800 v4.1 5.8GHz A/V Receiver Race Edition


ImmersionRC Uno5800 5.8GHz receiver Race Edition

High performance A/V Receiver for use on the 5.8GHz ISM band.
V4.1 adds 8 'Race Band' channels, for a total of 40 channels.
Compatible with all frequencies generated by the Vortex race quad.

$40.00
$40.00


In Stock: Totally in stock right now

ImmersionRC Vortex Crash Kit 1 - Plastic Parts


Contains the following parts, all in injected plastic, with the exception of the front bumper, and the screws.

1x Front Bumper, FR4
2x Side Plate
8x Arm Clip
4x Arm Pivot Top
4x Arm Pivot Bottom
4x Landing Bumper
4x Landing Mount
4x Motor Mount
8x Hex Bushing
1x Cam Support Base
1x Cam Support Arm
4x Dampener Pin
4x Dampener Circlip
4x Screw HA2x8
4x Screw HA2x6

$15.00
$15.00


In Stock: Totally in stock right now

ImmersionRC Vortex Crash Kit 2 - Cabon Fiber Parts


Vortex Crash Kit #2: Carbon Fiber Parts
In most serious crashes, the parts in Crash Kit #1 will suffice to get the Vortex in the air again. For the real serious stuff, parts from Crash Kit #2 may be required.

$67.50
$67.50


In Stock: Totally in stock right now

ImmersionRC Vortex FR4 Camera Bumper


Replacement front bumper for the Vortex 285.

1.5mm FR4, with an updated design which is more robust than the stock bumper.

$13.00
$13.00


In Stock: Totally in stock right now

ImmersionRC Vortex GoPro Recliner Kit


An updated anti-jello plate for the Vortex, which reclines the GoPro by 30 degrees, for optimal camera angle when flying at speed.

Includes:

1x Baseplate (Carbon Fiber)
1x Back Plate (Carbon Fiber)
2x 30 degree Side Plate (Carbon Fiber)
4x M3 Aluminium Nut
4x M3 Aluminium Screw
4x M3 T-Nuts
1x Laser-cut Foam Back Plate
1x GoPro Power Cable (2 pin picoblade -> USB)
1x Battery Strap

$45.50
$45.50


In Stock: Totally in stock right now

ImmersionRC Wire Set for 5.8GHz A/V Transmitters


Set of wires for 600mW 5.8GHz A/V Transmitter.

Includes

5p molex to tined end
2p to 2p molex - DC extention cable

$5.00
$5.00


In Stock: Totally in stock right now

Ino-Lab HG-750 / 760 Servo Case


$1.00
$1.00


In Stock: Totally in stock right now

Ino-Lab HG-D201HB Servo Case


Ino-Lab HG-D201HB Servo Case

$1.00
$1.00


In Stock: Totally in stock right now

Ino-Lab HG-D251 / 261 Series Case set

Ino-Lab HG-D251 / 261 Series Case set

$1.00
$1.00


In Stock: Totally in stock right now

Ino-Lab HG-D650HB Gear Set - Carbonite

Ino-Lab HG-D650HB Gear Set - Carbonite

$1.00
$1.00


In Stock: Totally in stock right now

IR Cable 20cm


Spare IR trigger cable identical to the one shipped with the StratoSnapper

$4.70
$4.70


In Stock: Totally in stock right now

IR Cable 40cm


Double length IR trigger cable for the StratoSnapper 40cm

$7.70
$7.70


In Stock: Totally in stock right now

ISDT Smart Charger Q6 Plus 300w/14A


The brand new ISDT Q6 Plus with rounded edge design easily stows in bag or pocket. Same size as the SC-608 charger with twice the power capacity.

The ISDT range of chargers are simple to operate, high powered and have an extremely accurate balance charge. They make an ideal field charger when connected to a DC power supply such as a vehicle battery or other high capacity battery source.

With a wide range of input voltage (7-32V) meaning you can use up to a 7s battery source (got some old 6s heli packs laying around? - this will make good use of them!)

Please note: This charger is DC input only, AC operation will require an external DC power supply.

Specifications

Input Voltage: DC 7-32V
Output Voltage: 0-30V
Charge Current: 0.1-14.0A
Discharge Current: 0.1-3.0A
Max Charge Capacity: 300W
Max Discharge Capacity: 8W
Balancing Current: 1A/cell
Balance Cells: 2-6S
Supported Batt. Type: LiFe/Lilon/LiPo/LiHv (1-6S), NiMH/Cd(1-16S), Pb(1-12S)
Display: 2.4" 320×240 IPS LCD
Operating Temperature: 0-40°C
Storage Temperature: -20-60°C
Dimensions: 80x80x33.5 mm
Weight: 119g

Includes

1x ISDT Q6 Plus Pocket Battery Balance Charger
1x Manual

$69.95
$69.95


In Stock: Sorry bro, Sold out

J1S Designs "Cyclone" Carbon Fiber Tail Blade Set (115mm)


BLADE SPECS:

ROOT: 5MM,
BOLT 3MM,
CHORD: 35MM-29MM,
WEIGHT: 6.8G

Highly efficient, tapered tail rotor design, reduces parasitic drag and allows for exact control in even the most demanding 3D maneuvers.

$49.50
$49.50


In Stock: Totally in stock right now

J1S Designs "Cyclone" Carbon Fiber Tail Blade Set (80mm)


BLADE SPECS:

ROOT:5MM,
BOLT 3MM,
CHORD: 29MM-24MM,
WEIGHT: 4.3G

Highly efficient, tapered tail rotor design, reduces parasitic drag and allows for exact control in even the most demanding 3D maneuvers.

$35.00
$35.00


In Stock: Totally in stock right now

JR Servo Lead Extension 40cm Ultra Light


Servo Extention Lead 32AWG
Much lighter than a standard servo lead.
Designed for smaller planes and gliders where weight is important.

$4.50
$4.50


In Stock: Totally in stock right now

JR Servo Lead Male 15CM


Specs:
Length: 15cm
Wire Gage: 26AWG
Connector: JR Type
Quantity: 1

$1.00
$1.00


In Stock: Totally in stock right now

JST Female battery pigtail 12cm length


Female JST battery pigtail 12cm length

$2.00
$2.00


In Stock: Totally in stock right now

JST Male battery pigtail 10cm length


Male JST battery pigtail 10cm length

$2.00
$2.00


In Stock: Sorry bro, Sold out

JST-PH-2.0 4 Way Parallel Charge Cable


Charge 4 single-cell lipo batteries at once - with a regular hobby charger.
Fits the 205mAh packs with PH2 connector.

This adapter is made with the finest ingredients and with great attention to detail. The best plugs, the thickest wire, and a high quality silicon coating.

Instructions:
- plug cable into charger
- connect 4 discharged batteries
- charge at 1S voltage and combined 1C current

For 4x 205mah batteries, the combined capacity is 820mah, so a 1C charge rate would be 0.82A. You can charge these packs with up to 2C (1.64A), but to maximise life time, 1C is better.

$9.00
$9.00


In Stock: Totally in stock right now

JST-PH-2.0 6 Way Serial Charge Cable


Charge 6 single-cell lipo batteries at once - with a regular hobby charger.
This serial charge cable is compatible with our PH2 batteries, and terminates in standard 4mm bullet connectors and a 6S balance plug.

This adapter is made with the finest ingredients and with great attention to detail. The best plugs, the thickest wire, and a high quality silicon coating.

Instructions:
- plug cable into charger
- connect 6 discharged batteries
- charge at 6S voltage and 1C current

$12.00
$12.00


In Stock: Sorry bro, Sold out

JST-PH-2.0 Pigtail


PH2 connector pigtail, board side.
If you want to use batteries with PH2 plug, this is the right connector to solder to your flight controller. Good connector, sufficient wire gauge, high quality silicon coating.

- PH-2.0 connector (aka mCPX, PowerWhoop)
- 100mm silicon coated wire

$2.50
$2.50


In Stock: Sorry bro, Sold out

KDE Direct 450XF Brushless Motor Series Replacement Kit - 3.5-4mm Version


$22.10
$22.10


In Stock: Totally in stock right now