Product Search

DS-995i - Servo King Tail Servo


The ServoKing DS-995i is a micro size digital servo featuring a metal gear train, high quality CNC machining aluminium alloy chasic, make the Servoking DS-995i has high hardness, and high quality to drive your every flying

SPECIFICATION:

Operation Voltage:5V-8V (6-7V fit)
Weight:20g (0.71oz)
Torque:
2.3kg/cm@5V
2.8kg/cm@6.0V
3.4kg/cm@7.4V
Speed:
0.04(sec/60∘)@7.4V
0.05(sec/60∘)@6.0V
0.06(sec/60∘)@5V
Dimension: 12x23x27.25mm
Frequence:760us/333hz
Gear Type:Metal Gear
Motor Type: Coreless
RoHS | CE

PACKING LIST:

1 x DS-995i Tail Servoking

1 x Hardware bag with servo arm and screws

$65.00
$65.00


In Stock: Totally in stock right now

DS215MG - KST Digital Servo


KST Digital Technology Limited is one of the designers and manufactures which can supply to R/C world of many different electronic kits, and Lynx select this performance high speed heli servo.

Lynx select this servo because after many test his quality was proven.

Perfect servo 300 and 450 class heli up to stretch kit as T-Rex 450-L – 450X - Mini Protos – Chase – Warp – Forza and similar heli.

Very high speed servo that thanks his frequency drive and torque is recommended for cyclic and rudder need.

FEATURES:

- This edition is the last one, called Red Case Edition.

- Body Case: Aluminum alloy shell

- Gears: Full Metal

- Stall Torque: 3.70Kg.cm witch 7.4V, 3.10Kg.cm with 6.0V, 2.50Kg.cm with 4.8V

- Speed: 0.05 sec/60° with 7.4V, 0.06 sec/60° with 6.0V, 0.07 sec/60° with 4.8V

- Frequency: 1520us/333Hz, 800us-2200us

- Voltage Rating 4.5 to 7.4V – Coreless Motor

- Dimensions and Weight: 23.1 mm wide x 12 mm thick x 27.4 mm high – 20.5g

PACKING LIST:

1 x DS215MG servo

1 x Hardware bag with servo arm and screws

$34.00
$34.00


In Stock: Sorry bro, Sold out

10001RC RC Logger HD Camera and Data Logger


The light weight “RC Logger HD” combines data and image capturing into one device allowing synchronized telemetry data and high density imaging collection during flight. The integrated data bus connects up to three sensor modules (optional available) in series allowing to capture GPS data, motor temperature or current flow and other telemetry data. Please refer to the product page for currently available and future available sensor modules. The RC Logger can be triggered manually or automatic, in both recording modes (video & still image) allowing to assign a free RX channel to connect to the RC Logger directly. Minimum photo trigger interval is 2 seconds. The trigger interval can be set by the user via the RC Logger Viewer software. If the trigger cable (included) is connected the RC Logger will be powered by the RC -helicopters / -airplanes / -cars battery

Features:
- External sensor data bus (connect up to 3 external sensor modules)
- Move-able camera head with lens fixing screw and metal horn to control head by servo
- Status LED
- Power LED
- Trigger/Power input (trigger automatically or by receiver/transmitter)
- HD image quality in video (1280 x 720 pixel) and still imaging (1600 x 1200 pixel) mode
- Micro USB 2.0 data/charging port
- SD card slot (max. 8 GB)
- Upgradeable firmware
- Device driver for Windows2000/XP/Vista/Windows7 (64 bit currently not supported)

Specs:
Main Unit Specifications:
Video resolution: 1280 x 720 pixel (HD)
Image resolution: 1600 x 1200 pixel
Video format: MPEG4
Frame rate: 25 FPS
Rechargeable battery: 800 mAh Li (replaceable)

Electrical Specifications:
Battery operation time (no external sensor): 1 hour min.
RX power supply voltage: 4.8 to 6.2 V DC
RX power supply current: 350 mA max.
Voltage supply to external sensor: 3.6 to 4.2 V DC
Current supply to external sensor: 200 mA max.

Physical Specifications:
Dimensions (L x W x H): 98 mm x 48 mm x 24 mm
Weight: 72 g

Includes:
- RC Logger HD
- ABS mounting bracket
- Metal servo connection horn
- Receiver Trigger Cable (for power and/or triggering from RX)
- Micro USB cable (to connect the RC Logger HD with the PC)
- PC software CD (RC Logger Viewer)
- Operating instructions

$44.50
$44.50


In Stock: Totally in stock right now

10003RC RC Logger LC Module


The "RC Logger LC" has an internal 4 MB flash memory chip and logs all add-on sensor data into the memory which can be analyzed with the RC Logger Viewer PC Software. Data may also be transmitted to a Notebook or PC via the down-link TX/RX module (not included). The "RC Logger LC" connects maximum 8 add-on modules at the same time and is fully compatible with the "RC Logger HD". Alternatively data may be viewed in real-time via the "RC Logger LC" LCD ground display station using the down-link module.

The "RC Logger LC" can be triggered via a free RC receiver channel or manually and set to auto-triggering mode. It includes a microUSB charging port, a down-link data port to connect the TX/RX module as well as an add-on sensor data port and a power and status led as well as an on/off switch. The "RC Logger LC" is very small an light weight. The trigger interval can be set by the user via the RC Logger Viewer PC software. If the trigger cable (included) is connected the RC Logger LC will be powered by the RC -helicopters / -airplanes / -cars battery.

Features:
External sensor data bus (connect up to 8 external sensor modules)
Status LED
Power LED
Trigger/Power input (trigger automatically or by receiver/transmitter)
4 MB internal flash memory
Micro USB 2.0 data/charging port
TX/RX port for 2.4 GHz wireless ground transmission modules (2 types optional available)
Upgradeable firmware
Device driver for Windows2000/XP/Vista/Windows7 (64 bit currently not supported)

Includes:
RC Logger LC
Receiver Trigger Cable (for power and/or triggering from RX)
Micro USB cable (to connect the RC Logger LC with the PC)
PC software CD (RC Logger Viewer)
Operating instructions

$29.80
$29.80


In Stock: Totally in stock right now

12 Point Snap Knife (Random Colour)

$1.00
$1.00


In Stock: Totally in stock right now

20003RC RC Logger Environmental Module


This product is intended for connecting it with the RC Logger HD or RC Logger LC (not included) to provide environmental information for a model helicopter, model car or model airplane. The product is powered by the RC Logger battery. Three external cables with temperature sensor can be used at the same time. Mounted onto an ESC, motor, muffler or battery to measure the temperature of these components. Temperature and humidity sensors are installed inside the module box to measure the environmental temperature and humidity as reference point. Pressure sensor is installed inside the module box to measure the air pressure of the model during flight in order to indicate the exact flight altitude of the R/C helicopter or R/C airplane. The temperature sensor supports temperature range of up to +250 degrees Celsius.

Features:
- Environmental module (Humidity, Pressure, Temperature)
- Status LED
- Power LED
- One I/O ports
- One external sensor port (supports three external sensors)

Specs:
Operating voltage: 3.6 to 6 V
Maximum current consumption: 25 mA
Operation temperature: -10 to +60 Celsius
Storage temperature: -20 to +60 Celsius

Internal Temperature Sensor Specs:
Internal temperature range: -40 to +123.8 Celsius
Internal temperature resolution: 0.01 Celsius
Internal temperature repeatability: +/- 0.1 Celsius
Internal temperature accuracy (At 25 Celsius): +/- 0.5 Celsius

External Temperature Sensor Specs:
External temperature range (low range): -40 to +90 Celsius
External temperature resolution: >= 0.1 Celsius
External temperature range (high range): 0 to +250 Celsius
External temperature resolution: >= 0.1 Celsius

Humidity Sensor Specs:
Humidity range: 0 to 100 %RH
Humidity resolution: 0.05 %RH
Humidity repeatability: 0.1 %RH
Humidity accuracy (Between 20 to 60 Celsius): +/- 4.5 %RH (20 - 60 %RH), +/- 7.5 %RH (10 - 20 %RH, 60 - 90 %RH ), +/- 9.5 %RH (0 - 10 %RH, 90 - 100 %RH)

Pressure Sensor Specs:
Pressure range: 300 to 1100 mbar
Pressure resolution: 0.01 mbar
Pressure accuracy: (Between 0 to 65C & 700 to 1000mbar) +/- 2.5 mbar, (Between 0 to 65C & 300 to 700mbar) +/- 3 mbar, (Between -20 to 0C & 300 to 1100mbar) +/- 4 mbar

Physical Specs:
- Dimensions (L x W x H): 30 mm x 43 mm x 16 mm
- Weight: 13 g

Includes:
- Environmental module
- Logger Connection Cable to connect to RC Logger HD / RC Logger LC
- Module Connection Cable to connect to other sensors
- Two (2) external temp. probes (Low Range)
- Operating instructions

$29.80
$29.80


In Stock: Totally in stock right now

20006RC RC Logger Orientation & G-Force Module


Overview:
This product is intended for connecting it with the RC Logger HD, RC Logger PRO or RC Logger LC (not included) to provide orientation and force information for a model helicopter, model car or model airplane. The product is powered by the RC Logger battery. By using Magnetometer, Gyroscope and Accelerometer with 3D orientation and calculation algorithm to determine pitch angle, yaw angle, roll angle, direction, acceleration, angular and velocity during flight.

Features:
* Orientation and G-Force module
* Status LED
* Power LED
* Two I/O ports

Technical Specifications:
Operating voltage: 3.6 to 4.2 V/DC
Maximum current consumption: 100 mA
Operation temperature: -30 to +60 Celsius
Storage temperature: -40 to +60 Celsius
Pitch-, Yaw-, Roll Angle Range: -180 to +180 Degree
Resolution: <= 1 Degree
Direction Range: 0 to 360 Degree
Resolution: <= 1 Degree
Acceleration Range: not finalized

Physical Specifications:
Dimensions (W x H x D): 43 x 16 x 30 mm
Weight: 21 g

Includes:
* Orientation & G-Force module
* Logger Connection Cable to connect to RC Logger HD / RC Logger LC
* Module Connection Cable to connect to other sensors
* Operating instructions

$62.50
$62.50


In Stock: Totally in stock right now

20010RC - RC Logger OSD Module


The revolutionary OSD module offers true user configurable experience to FPV applications. When connected with sensor modules, the OSD allows real-time overlay of telemetry sensor data onto video signal for instant transmission. It provides true freedom for users to customize their preferred overlay layout via RC Logger Viewer Software or RC Logger Commander Software.

Customizable overlay position of selected telemetry data

Instead of limiting the OSD display to a fixed layout, the OSD module offers you the freedom to customer your preferred overlay layout via the RC Logger Viewer Software. Just drag-and-drop your selected overlay elements onto the simulated screen to the desired position during configuration and you will have your preferred OSD layout for FPV.

Selectable overlay style (text or graphics in 10 colors)

In addition to selectable overlay position, the OSD module also provides sets of text or graphical overlay elements in 10 preset colors to match your preference for different flying occasions. Different layout settings can be saved and exported / imported for future use with ease.

Home location indication

To help guide your RC model home, Home location can be indicated as OSD elements during flying, showing the angle and distance of your model to the home location. Home position can be set by the function (FN) button before your model takes off.

Extra connectivity for flexible expansion

You can connect the OSD module not only to the RC Logger PRO camera logger, but also to other devices that provide NTSC / PAL AV output. In additional, the OSD module can work with both 5.8 GHz Video transmission and the 2.4 GHz Data transmission simultaneously, meaning that you can enjoy FPV experience as well as having an additional set of monitor for observing telemetry data of the connected sensor modules and buzzer alerts in real-time.

The following items are included in the delivery:

OSD Module
Module connection cable x 2
Receiver trigger cable
microUSB cable
A/V cable (2.5 mm mono to I2C)
A/V cable (I2C to RCA)
Operating instructions

$57.00
$57.00


In Stock: Totally in stock right now

20016RC - RC Logger 5.8 GHz Clover Leaf Antenna


The RC Logger 5.8 GHz Cloverleaf Antenna is your ideal enhancement for FPV and Aerial Photography. The Right-hand circular polarization (RHCP) system antenna is simple to install on your RC Logger 5.8 GHz transmission set. Simply remove the stock antenna and screw in the clover leaf antenna. The antennas include standard SMA adapters compatible with the RC Logger 5.8 GHz wireless video transmission set or other standard SMA 5.8 GHz video transmitters and receivers. The hard case enclosure ensure that your antennas are never damaged or bent out of shape after a rough landing while the flexible cable ensures easy positioning for optimum performance.

The following items are included in the delivery:

4-leaf 5.8 GHz Clover leaf antenna (RX)
3-leaf 5.8 GHz Clover leaf antenna (TX)

Features:

Easy to install
Improvement on video quality with less distortion
Expertly tuned for maximum performance
Durable and protected in plastic enclosure

General Specifications:

Connections SMA plug
Technical Specifications
Impedance 50 Ohm
Power consumption 20 W
Physical Specifications
Dimensions (W x H x D) TX: 80 mm (including clover), RX: 120 mm (including clover)
Weight TX: 12.5 g, RX: 14 g
Frequency Specifications
Antenna gain 5 dBi
Frequency range 5700 - 5900 MHz
Polarization RHCP
Radiation Type Omni-directional
Standing Wave Ration (SWR) 1.5
Voltage Standing Wave Ratio (VSWR) Less than 1.5

$23.30
$23.30


In Stock: Sorry bro, Sold out

30001RC RC Logger Module Connection Cable 20cm


Replacement “Module Connection Cable”. It connects two add-on modules together. It cannot be used to connect modules with the RC Logger directly. One such cable is included with each add-on module.

$1.00
$1.00


In Stock: Totally in stock right now

30004RC RC Logger Receiver Trigger Cable 20cm


Replacement “Receiver Trigger Cable”. It connects the RC Logger HD or RC Logger LC trigger input with the receiver AUX channel to trigger the RC Logger HD or RC Logger LC by your radio remote control. The product includes a ferrite ring. One such cable is included with the RC Logger main unit.

$2.00
$2.00


In Stock: Totally in stock right now

30005RC RC Logger Temp Sensor (low range)


Replacement “Temperature Sensor (Low Range)” used with the Environmental Add-On module. Two such sensors are included with the Environmental Add-On module delivery content.

$5.00
$5.00


In Stock: Totally in stock right now

30006RC RC Logger Temp Sensor (high range)


This additional sensor can be used in combination with Add-On Environmental module which can be connected to either the RC Logger HD or RC Logger LC. The max. temperature is plus 250 Celsius. This sensor is not included with Environmental Add-On module delivery content and must be ordered separately.

$7.50
$7.50


In Stock: Totally in stock right now

30009RC RC Logger Buzzer Cable


The buzzer can be used in combination with the Add-On Power&RPM module which can be connected to either the RC Logger HD or RC Logger LC. The buzzer will sound an alert if LiPo cell voltage is low. One such cable is included with the module.

$7.50
$7.50


In Stock: Totally in stock right now

30013RC RC Logger MicroUSB Cable 100cm


Replacement "microUSB Cable" which is used in combination with the RC Logger HD or RC Logger LC to either charge the RC Logger (RC Logger HD only) or to use as data cable to transfer data between the RC Logger LC or RC Logger HD and your PC. The cable is 100 cm long (1 Meter) and is included with both, the RC Logger LC and the RC Logger HD. This cable is required to connect to the PC to set-up the RC Logger HD.

$2.00
$2.00


In Stock: Totally in stock right now

30014RC RC Logger Tripod (Extendable)


“Expandable Tripo Stand”. The stand can be used in combination with the Add-On 2.4 GHz RX/LCD Monitor module which can be connected to the RC Logger LC. The stand uses a standard tripod screw and is expandable. It's lightweight yet robust construction allows a secure support stand for the 2.4 GHz RX/LCD Monitor module.

$6.30
$6.30


In Stock: Totally in stock right now

30015RC RC Logger Dual USB Car Charger


2 A Dual USB Car Charger. Charge your RC Logger devices while you are in your car. The product is intended for charging or operating USB devices, such as 2.4 GHz Data RX LCD Monitor or RC Logger HD, HD2 or PRO. It provides maximum 2 A current via two USB ports. The product is powered by a 12 V/DC car cigarette socket. The product is CE approved (Available from July 15th 2011).

$6.00
$6.00


In Stock: Totally in stock right now

30016RC RC Logger Car Suction Cup


The ideal companion for recording video from inside a vehicle. The uncomplicated installation and mounting which can be adjusted in 3 dimensions allow every camera angle to be realised. Suitable for RC Logger HD / HD2 / PRO and Action Mounts. Requires Action Mounts 30017RC. (Camera, lens and action mounts are not included).

$8.90
$8.90


In Stock: Totally in stock right now

30017RC RC Logger Action Mounts


$12.50
$12.50


In Stock: Totally in stock right now

30018RC RC Logger Adventure Case


RC Logger PRO/HD2/HD Adventure Case. Keep your RC Logger camera well protected. The adventure case is water resistant with air compensation valve. It is constructed as tough ABS housing with detachable clip and nylon strap, fully dust-proof. Your perfect outdoor protection. Suitable for compact cameras or your cellphone as well.

Inner dimensions: 120 x 75 x 45 mm.

$13.50
$13.50


In Stock: Totally in stock right now

30019RC RC Logger Radio System Mount


Use with 5.8 GHz video monitor or 2.4 GHz data RX from RC Logger. Universal mount for most RC radio systems. Includes mounting adapter for 5.8 GHz video monitor and DIN size camera screw.

$8.10
$8.10


In Stock: Totally in stock right now

31001RC RC Logger Fish Eye Lens


With the fish eye lens from the RC Logger range of lenses, right and left are no longer a concern. Compatible with all RC Logger cameras, the lens can be easily screwed on, thereby enabling exposures with a viewing angle of 180º. Pin sharp exposures showing greater detail of surrounding areas thus become very easy to achieve. Made from solid aluminium, with a secure screw cap and high-quality lens, the fish eye lens is the ideal companion on the airfield or racing track.

Specs:
- 180º angle of view (0.28x)
- Solid aluminium housing

Technical Data:
Focal length: 0.28x
Housing: aluminium
Dimensions (Ø x H): 25 x 15 mm
Weight: 11.4 g

Package content:
- Lens
- 2 x protective cap
- Protective bag
- 1 x ring
- Operating instructions

$14.50
$14.50


In Stock: Totally in stock right now

31003RC RC Logger Telephoto Lens


The telephoto lens from the RC Logger range of lenses appears to bring the horizon closer. Compatible with all RC Logger cameras, the lens can easily be screwed on, thereby increasing the focal length by a factor of 2x. Pin sharp exposures showing greater detail in the surrounding areas thus become very easy to achieve. Made from solid aluminium, with a secure screw cap and high-quality lens, the telephoto lens is the ideal companion on the airfield or racing track.

Specs:
- Optical magnification 2x
- Solid aluminum housing

Technical Data:
Focal length: 2.0x
Housing: aluminum
Dimensions (Ø x H): 25 x 15 mm
Weight: 9.8 g

Package content:
- Lens
- 2 x protective cap
- Protective bag
- 1 x ring
- Operating instructions

$12.00
$12.00


In Stock: Totally in stock right now

40001RC RC Logger Digital Pitch Gauge


Flybarless RC helicopters make it difficult for pilots to adjust and check the pitch set-up of helicopter main rotor blades. The new Digital Pitch Gauge from RC Logger offers simplicity, high accuracy and ultra fast pitch angle measurement. The pitch gauge is powered by two CR2032 button cells and allows blades up to 700 mm. The gauge is detachable from the mounting plate and secured via magnets.

A perfect tool for accurate blade and pitch alignment which is essential for flybarless systems. Measurement is extremely fast and precise.

Features:
- Amazingly convenient.
- On/Off button allows you to conserve battery life.
- Hold button will stop the sensor from updating the angle that it senses. Useful for those who are working in an unstable environment.
- Zero button allows you to set "0" at any given position of the sensor.. This allows you to see your pitch travel at any interval.
- Digital sensor is removable from the blade clip portion (attached by 2 magnets), allowing you to use it for any of your household angle-sensing needs!
- Digital sensor is capable of being calibrated. If your sensor isn't seeing 90 degrees as 90 degrees, calibrate it and it will. Very cool function.

$22.50
$22.50


In Stock: Totally in stock right now

40004RC RC Logger Digital Pitch Gauge 2 Lite


40004RC RC Logger Digital Pitch Gauge 2 Lite

The new generation Digital Pitch Gauge 2 Lite with patented technology is packed with all popular features including rotating display, calibration, auto power-off, plus innovative enhancements like buzzer alert for target angles, and a rubber band for protection.

Pitch and roll measurement

The Digital Pitch Gauge 2 Lite offers two dimensional measurement - Pitch angle as well as Roll angle measurement.

Measure modes (Main rotor blade)

The Digital Pitch Gauge 2 Lite comes with a handy detachable main rotor blade mount adapter that allows you to adjust the main rotor blade with ease. Just put the adapter in place and snap on the Pitch Gauge via the inserted magnets.

4 memory profiles to preset target angles

Now you can pre-define your preferred target angles beforehand and save it into your Digital Pitch Gauge 2 Lite. Four memory profiles are available for storing target measurements for measurement mode of the profiles. During tuning, a buzzer alert will signal when the target angle is reached.

3 seconds countdown time to hold the display, set zero angles, or set target angle

A countdown time of 3 seconds is available when you are freezing the display for easier reading, setting a reference zero angles or setting a target angle for memory storage. This means that you have a buffer period for placing and adjusting the pitch gauge in the desired position after pressing the function button. No more worries about affected readings by the button pressing action.

The following items are included in the delivery:

Digital Pitch Gauge 2 Lite
Mount adaptor for main rotor blade
Rubber band protector
Operating instructions

Features:

Pitch and Roll measurement
4 memory profiles to preset target angles
Countdown (3 secs) to hold display or set zero / target angle
Rotating display
Calibration function
Auto power-off
Buzzer alert for target angles
Flexible installation via inserted magnet or screw nut

Technical Specifications

Operating temperature 0 to +40 Celsius
Operating voltage 6 V/DC (CR2032 x 2)
Power consumption max. 0.5 W
Resolution 0.1 Degree

Physical Specifications

Compatible blade width Main rotor blade (21 to 75 mm)
Dimensions (W x H x D) Pitch Gauge (62 x 42 x 16.5 mm), Main rotor blade mount (120 x 72.5 x 15.6 mm)
Weight Pitch Gauge (41 g), Main rotor blade mount (25 g)

$49.00
$49.00


In Stock: Sorry bro, Sold out

4003 KBDD 84mm Night Tail Blade Kit w/Ultra UV LED


Our night blades are unlike anything seen before. Not only do they handle exceptionally well, they glow in the dark. We send them as a kit including a pre-wired Ultra-Violet LED. The 59.6 has a 5mm LED. The 84mm and 102mm comes with an Ultra Bright LED cluster. The LEDs keep the blades charged.

If you should lose electrical power during a night flight the tail blades will continue to glow brightly to allow you to recover the helicopter safely. This allows night flights without adding extra weight from glow sticks. The helicopter has the same characteristics at night as it does during the day with our product.

Our Helicopter tail blades are created using a complex combination of materials which provide the perfect mix of strength and flexibility. The blades have a very large surface area, yet weigh very little. We currently provide them in three sizes.

The 59.6mm length is our smallest blade which weighs 1.5g. This size fits the popular Trex 450.

The next larger is the 84mm for the 30/50 size helicopters weighing just 3.8g.
The final blade is the 102mm and is for the 60/90 helicopters. This blade weighs only 6g.

Weight is per blade.

LED can be powered directly by 2S or 3S Lipo.

$18.90
$18.90


In Stock: Totally in stock right now

4016 KBDD 450 Size Tail Blades - Black


59.6MM Black tail rotor blades for your 450 size electric heli.

$5.60
$5.60


In Stock: Totally in stock right now

4017 KBDD 450 Pro Size Tail Blades - Neon Yellow


K&B Dream Designs Helicopter tail blades are created using a complex combination of materials which provide the perfect mix of strength and flexibility. The blades have a very large surface area, yet weigh very little.

Measures: 61mm length
Weighs 1.6g.

This size fits the T-Rex 450 Pro & T-Rex 450.

$5.90
$5.90


In Stock: Totally in stock right now

4018 KBDD 450 Pro Size Tail Blades - Neon Green


K&B Dream Designs Helicopter tail blades are created using a complex combination of materials which provide the perfect mix of strength and flexibility. The blades have a very large surface area, yet weigh very little.

Measures: 61mm length
Weighs 1.6g.

This size fits the T-Rex 450 Pro & T-Rex 450.

$5.90
$5.90


In Stock: Totally in stock right now

4019 KBDD 450 Pro Size Tail Blades - Neon Orange


K&B Dream Designs Helicopter tail blades are created using a complex combination of materials which provide the perfect mix of strength and flexibility. The blades have a very large surface area, yet weigh very little.

Measures: 61mm length
Weighs 1.6g.

This size fits the T-Rex 450 Pro & T-Rex 450.

$5.90
$5.90


In Stock: Totally in stock right now

4025 KBDD Tail Blades - Extreme Edition - Neon Lime - 40mm


$3.60
$3.60


In Stock: Totally in stock right now

4026 KBDD Tail Blades - Extreme Edition - Pearl Blue - 40mm


$3.60
$3.60


In Stock: Totally in stock right now

4027 KBDD Tail Blades - Extreme Edition - Pearl White - 40mm


$3.60
$3.60


In Stock: Totally in stock right now

4028 KBDD Tail Blades - Extreme Edition - Neon Orange - 40mm


$3.60
$3.60


In Stock: Totally in stock right now

4029 KBDD Tail Blades - Extreme Edition - Neon Yellow - 40mm


$3.60
$3.60


In Stock: Totally in stock right now

4030 KBDD Tail Blades - Extreme Edition - Midnight Black - 40mm


$3.60
$3.60


In Stock: Totally in stock right now

4031 KBDD Tail Blades - Extreme Edition - Neon Lime - 72.5mm


For Trex 500 and other 500 class heli with 5mm root.

The new Extreme Edition blades from KBDD are designed for high RPM, high performance 3D helicopters. They are stiffer and stronger than ever before.

$9.80
$9.80


In Stock: Totally in stock right now

4032 KBDD Tail Blades - Extreme Edition - Pearl Blue - 72.5mm


For Trex 500 and other 500 class heli with 5mm root.

The new Extreme Edition blades from KBDD are designed for high RPM, high performance 3D helicopters. They are stiffer and stronger than ever before

$9.80
$9.80


In Stock: Totally in stock right now

4035 KBDD Tail Blades - Extreme Edition - Neon Yellow - 72.5mm


For Trex 500 and other 500 class heli with 5mm root.

The new Extreme Edition blades from KBDD are designed for high RPM, high performance 3D helicopters. They are stiffer and stronger than ever before

$9.80
$9.80


In Stock: Totally in stock right now

4036 KBDD Tail Blades - Extreme Edition - Midnight Black - 72.5mm


For Trex 500 and other 500 class heli with 5mm root.

The new Extreme Edition blades from KBDD are designed for high RPM, high performance 3D helicopters. They are stiffer and stronger than ever before

$9.80
$9.80


In Stock: Totally in stock right now