New Bits

6S ESC Capacitor


$3.00

The highest power, lowest internal resistance capacitor on the market. In a tiny, tiny case! 220uF, 35V. Solder one to each ESC or just solder them to your PDB to fight voltage spikes.
Specifications

Max Voltage: 35V
Capacitance: 220uF
Impedance: 49mOhm
Height: 11.5mm
Width/Diameter: 8mm
Weight: 1.0g

List Price: $3.00
Price: $3.00
SKU: TBS-6S-ESC-CAP


In Stock: Totally in stock right now

TBS Charger 50w / 4A


$40.00

From 2S to 4S batteries this charger makes charging easy and hassle free no buttons to press or fiddling with balancing settings. You plug in the balance lead of your battery and the charger handles the rest, you can check on how the charging is going from the light indicators on the top.
Specification

AC Input voltage: 100V-240V
Charge power: 50W
Charge current: 4.0A
Balance current: 300mA
LiPo battery cell count: 2-4 Series
Indication: 4x LED Capacity Indication
Charge mode: balance charge
Dimension: 98*98*36mm
Weight: 278g

Includes

TBS CHARGER 50W/4A charger unit
AV cable (EU Type) does not include AU adapter sorry!

List Price: $40.00
Price: $40.00
SKU: TBS-CHARGER-50W4A


In Stock: Totally in stock right now

TBS Large GoPro Strap (for Vendetta V1/V2)


$7.00

Large fuzzy straps included with every TBS Vendetta. For securing the GoPro to the Vendetta frame.

20*295mm

List Price: $7.00
Price: $7.00
SKU: TBS-STRAP-GOPRO-VEND


In Stock: Totally in stock right now

TBS Graphene 1300mAh 6S 75C 22.2V


$55.00

The TBS Graphene packs are here! You get power when you need it, without regret. It takes a lot of abuse and doesn't set you back much from the start. The high discharge rate will provide a stable voltage despite high Amp draws, without sacrificing the lifespan of the battery. Give them a try!
Specifications

Capacity: 1300mAh
Discharge: 75C
Voltage: 22.2V (6S)
Weight: 243g
Dimensions: 78x34x50mm
Plugs: XT-60 / JST-XH

List Price: $55.00
Price: $55.00
SKU: TBS-GRAPHENE-6S-1300-75C


In Stock: Totally in stock right now

ETHIX GoPro Strap


$10.00

These straps have a rubber-like coating on the back for extra holding strength, and durability. The coating takes a few seconds to really suck onto your GoPro and hold it super tight. Strap of choice of the ETHiX crew. This set comes with 4 straps for all your rigs.

Length: 20mm x 280mm
Quantity: 4 pieces
Stickness level: Over 9000

List Price: $10.00
Price: $10.00
SKU: TBS-ETHX-GoPro-Strap


In Stock: Totally in stock right now

TBS XF-RACE Antenna 915MHz


$8.50

The Crossfire RACE antenna is a new design for miniature setups or builds where weight is more critical than range. It will give you range about as good as a regular "Long Range 2.4GHz system", but maintaining all of the low latency properties and other conveniences that you have come to expect from the Crossfire.

We suggest to mount the antenna vertically using the foam in the designated location to provide spacing to any conductive materials in order to allow this antenna to provide optimal performance.
Technical Specifications:

Center Frequency: 915 MHz
VSWR: <2
Gain: 2dBi
Length: 34 mm
Width: 7 mm
Height: 0.8 mm
Antenna Connector Type: u.FL
Weight: 0.8g (without foam)

List Price: $8.50
Price: $8.50
SKU: TBS-XF-RACE-ANT-915


In Stock: Totally in stock right now

LED - 3535 Mini 4 LED Strip - RGB (5pcs)


$14.00

our LED strip made from mini 3535 WS2812b LEDS. These mini LEDs emit the same lumens as the larger 5050 but are smaller and lighter. They require connection to your FC to drive colours.

The board includes a 5V gate driver to lift your 3.3v FC signal to 5V which improves the reliability.

The package size has been shrunk making them easier to mount on the edge of your arms (7.5mmx14.5mm). These are a lot smaller than other brands..

The LEDs are 5V only are draw a max of around 180 milli-amps, typically less than half that if just a single colour is emitted.

We recommend insulating the bottom from conductive surfaces (eg. Kapton tape).

We recommend using 3M VHB to mount LEDS.

Contains 5 LED strips.

Note: these are small solder pads, experienced users only.

List Price: $14.00
Price: $14.00
SKU: BLT-LED-4RGB-GRID


In Stock: Totally in stock right now

LED - 3 LED Strip - RGB (5pcs)


$14.00

Three LED strip made from WS2812b LEDS. They require connection to your FC to drive colours.

The board includes a 5V gate driver to lift your 3.3v FC signal to 5V which improves the reliability. We have also included a large 10uF 25V cap on the power rail to improve overall reliability.

The package size has been shrunk making them easier to mount on the edge of your arms (31mmx5mm). These are a lot smaller than other brands..

The LEDs are 5V only are draw a max of around 180 milli-amps, typically less than half that if just a single colour is emitted.

We recommend insulating the bottom from conductive surfaces (eg. Kapton tape).

We recommend using 3M VHB to mount LEDS.

Contains 5 LED strips.

List Price: $14.00
Price: $14.00
SKU: BLT-LED-3RGB-STRIP


In Stock: Totally in stock right now

Battery Strap 300x25mm - Anti-slip (2pcs)


$8.00

Simple and effective battery strap with non slip silicone coating.

List Price: $8.00
Price: $8.00
SKU: BLT-STRAP-300x25-AS


In Stock: Totally in stock right now

Kraken PDB - 2.0mm


$12.70

Custom PDB for the Kraken. Used in the K5X Frames. The legs of this pdb are 14.6mm wide.

Finished in high quality matt black and includes 8 volt LDO regulator.

Item does not include press nuts, sold separately.

Note: the regulator should only be used to power camera and or VTX or you may experience a brown out.

Instructions on use of PDB located HERE

List Price: $12.70
Price: $12.70
SKU: BLT-100500705


In Stock: Totally in stock right now