Rotor blades Torsion blades are considered to be one of the best rotor blades on the market due to its design and parameters. Suitable for both, beginners and 3D pilots as well, who particularly appreciate its firmness and truculence in 3D naviation. In turns, where bigger pitch angle is necessary, its airfoil and design increase the performance and power. In particular, the most important advantage is an exellent performance in autorotation mode where the required power is retained.

Torsion Blades are continuously developed and recently a number significant improvements were done. Among others the design of all types has been changed as well as a less expensive type of glass fibre blades are new in the programme giving the pilot best parameters for standard acrobatic flight. The surface finish, the balancing and the mechanical resistance of the blades have been greatly improved. The enhancement of the white surface of the blades improved the visibility and allows a better "reading" of the exact position of the helicopter. The carbon fibre blades can be differentiated from the glass fibre blades in that the carbon blades have Petr Novotnys signature below the Torsion Blades logo, while the glass fibre blades are only having the logo. However, all tail rotor blades are made of carbon fibre.

Specifications:
Length: 430mm
Root: 10mm
Hole: 3mm
Weight: 58~ grams

NOTE: All Torsion Blades have been structurally designed and tested to withstand all loads exerted in aerobatic flight.

Please observe the following RPM maximums for the Torsion main blades:

600 - 710mm CF Blades must not exceed 2400rpm.
430 - 500mm CF Blades must not exceed 2700rpm.
315mm CF Blades must not exceed 2900rpm.

Any modification or damage during a possible flight accident or any damage caused by the user will invalidate the warranty of the product. Check the surface of the blades after each flight for damages. Contact us or Torsion blades in any case of need.