T-REX 700 RES FRAME SET (Rear Elevator Servo) (MADE FROM 2MM CARBON FIBER)

NOTE: MOTOR MOUNT FRAME SUPPORT NOT INCLUDED WITH THE KIT

PICTURES AND RENDERINGS ARE REFERANCE ONLY.

This frame has some modifications from the first version.

Features:

Rear mounted elevator servo. geometry is 90 degrees, the servo output shaft is on the same plane as the bellcrank centerline.
Increased material around motor and bearing blocks for a more rigid frame.
Carbon VERTICAL Support plates included for added rigidity.
Socket head cap screws replace the stock shoulder bolts, no need to spend $40.00 extra dollars for a screw kit. No more stripped bolts either.
Predrilled for a 3rd bearing block.
ESC platform above rear elevator servo.
Front frame support adds strength and more electronics placement.
Integrated locking lipo tray, removes from the rear and does not require the canopy to be removed.
Frame set Comes With the following pieces:

Side Frame w/bearings x2
G-10 Lipo Tray x1
Lipo Rail Sides x2
Vertical Frame Supports x2
Rear ESC Tray x1
5mm Aluminum Hex x4
M3x10 SHCS x24
M3x10 BHCS x2
M2.5x5 SHCS x10
M2.5x6 Flat Head Screws X4
2 - Elevator Servo Linkage Rods