Beta65X 2S Whoop Quadcopter Frsky


$179.00

Introducing a new era for Whoop micro drones. This 2S Whoop drone has the power to fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.

A team of well respected micro modders have teamed up with BetaFPV to produce this whoop, being involved and consulted on every single step including frame design from scratch, FC and ESC stack design, motor design and prop combinations.

A lot of time and effort by not only those running BetaFPV, but purist hobbyists, has gone in to the research and development of this quad.

A QUICK LOOK

High performing STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, the Beta65X is ready to bind and fly out of the box without requiring tedious tuning.
Durable and light enough frame is custom produced for the Beta65X. A total assembled weight of 26g gives pilots a good balance of weight and nice punch on 2S voltage.
Fully assembled — no soldering or tinkering necessary. The custom produced 17500kv 0802 motors are the lightest ever produced and replacing them is easy with simple, light-weight, plug and play connectors.
2 x 1S batteries connected in series is configured by default, making this new offering a more affordable upgrade.
THE IMPORTANT STUFF

Weight: 26g (without battery)
Motors: 0802 17,500KV with connector
Props: 31mm 4-blades props, 1mm shaft opening
Camera tilt angle: 35 degrees
FC SPECS

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC SPECS

Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinuous current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Connector: XT30 or PH2.0 series connector
CAM/VTX SPECS

The whoop comes with a custom split Z02 smart audio AIO cam/vtx by default with a custom designed mount for a 35 degree viewing angle for faster flying.

Output power: 0mW, 25mW and 200mW (switchable)
Smart Audio function is included for radio control out of the box
Antenna: Dipole
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
PROPS OUT
The Beta65X drone also comes with "props out" by default. Why we need "props out" direction?

Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.

POWER CABLE
There is only one choices for the Beta65X - PH 2.0. The two 260mAh Lipo HV 1S batteries can be inserted into the slot in design, as seen below.

CUSTOMED Z02
The AIO camera VTX on the Beta75X is a customed version of Z02. The VTX board and camera board are split and 35 degree camera mount for more fast flying. At the same time, it have all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

PACKAGE
1 * Beta65X BNF 2S Whoop Quadcopter
1 * Spare 31mm 4-blades props (2CW+2CCW)
2 * 260mAh 1S batteries - none included with PNP version.
1 * spare canopy

List Price: $179.00
Price: $179.00
SKU: 00313360


In Stock: Totally in stock right now